HELLO! BOOT0 is starting! boot0 version : 3.1.0 reg_addr 0x01f00100 =0x00000000 reg_addr 0x01f00104 =0x00000000 reg_addr 0x01f00108 =0x00000000 reg_addr 0x01f0010c =0x00000000 reg_addr 0x01f00110 =0x00000000 reg_addr 0x01f00114 =0x00000000 DRAM DRIVE INFO: V1.5 DRAM CLK =552 MHZ DRAM simple test OK. dram size =512 card boot number = 2 card no is 2 sdcard 2 line count 0 [mmc]: mmc driver ver 2014-07-07 16:54 [mmc]: ***Try SD card 2*** [mmc]: mmc 2 cmd 8 timeout, err 0x00000100 [mmc]: mmc 2 cmd 8 err 0x00000100 [mmc]: mmc 2 send if cond failed [mmc]: mmc 2 cmd 55 timeout, err 0x00000100 [mmc]: mmc 2 cmd 55 err 0x00000100 [mmc]: mmc 2 send app cmd failed [mmc]: ***Try MMC card 2*** [mmc]: MMC ver 4.5 [mmc]: SD/MMC Card: 4bit, capacity: 3728MB [mmc]: vendor: Man 0x0090014a Snr 0x012084b9 [mmc]: product: H4G2a [mmc]: revision: 1.1 [mmc]: ***SD/MMC 2 init OK!!!*** sdcard 2 init ok The size of uboot is 0x000bc000. sum=0x0ccccd69 src_sum=0x0ccccd69 set_mmc_para,sdly 50M 0 set_mmc_para,sdly 25M 0 Succeed in loading uboot from sdmmc flash. Ready to disable icache. Jump to secend Boot. [ 0.335] U-Boot 2011.09-rc1 (Jun 19 2018 - 20:01:23) Allwinner Technology [ 0.343]version: 1.1.0 [ 0.428]pmbus: ready [ 0.430]PMU: AXP221 [ 0.432]PMU: AXP22x found [ 0.436]PMU: dcdc3 1200 [ 0.439]PMU: pll1 1008 Mhz,PLL6=600 Mhz AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz set power on vol to default dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 eldo1_vol = 3300 eldo2_vol = 3300 find power_sply to end no battery, limit to dc fel key old mode run key detect no key found no key input dram_para_set start dram_para_set end [ 2.497]DRAM: 512 MiB relocation Offset is: 15b11000 [PWM]backlight_bright=150,period_ns=20000,duty_ns=11718 smcl's set manager is NULL workmode = 0 MMC:. 2 [ 2.700][mmc]: mmc driver ver 2014-07-15 17:16:00 [ 2.705][mmc]: get sdc_2xmode ok, val = 1 [ 2.709][mmc]: get sdc_f_max fail,use default sdc_f_max 50000000 [ 2.715][mmc]: get card_line ok, card_line = 4 [ 2.720][mmc]: get sdc_ex_dly_used fail,use default dly [ 2.725][mmc]: SUNXI SD/MMC: 2 [ 2.729][mmc]: mmc 2 2xmode config clk [ 2.742][mmc]: ************Try SD card 2************ [ 2.747][mmc]: mmc 2 cmd 8 timeout, err 100 [ 2.752][mmc]: smc 2 err, cmd 8, RTO [ 2.757][mmc]: mmc 2 mmc cmd 8 err 0x00000100 [ 2.761][mmc]: mmc send if cond failed [ 2.765][mmc]: mmc 2 cmd 55 timeout, err 100 [ 2.769][mmc]: smc 2 err, cmd 55, RTO [ 2.775][mmc]: mmc 2 mmc cmd 55 err 0x00000100 [ 2.779][mmc]: send app cmd failed [ 2.782][mmc]: ************Try MMC card 2************ LCD_panel_init [ 3.068][mmc]: mmc 2 2xmode config clk [ 3.082][mmc]: mmc 2 2xmode config clk [ 3.092][mmc]: mmc 2 2xmode config clk [ 3.101][mmc]: MID 000090 PSN 2084b92d [ 3.104][mmc]: PNM H4G2a. -- 0x48-34-47-32-61-11 [ 3.109][mmc]: PRV 0.1 [ 3.112][mmc]: MDT m-3 y-2018 [ 3.115][mmc]: MMC ver 4.5 [ 3.118][mmc]: ---------------mmc->clock 50000000----------- [ 3.123][mmc]: ---------------mmc->bus_width 4-------------- [ 3.129][mmc]: SD/MMC Card: 4bit, capacity: 3728MB [ 3.134][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB [ 3.140][mmc]: ************SD/MMC 2 init OK!!!************ [ 3.147]sunxi flash init ok In: serial Out: serial Err: serial --------fastboot partitions-------- -total partitions:7- -name- -start- -size- boot-res : 1000000 1000000 env : 2000000 1000000 boot : 3000000 1000000 rootfs : 4000000 20000000 data : 24000000 1000000 sdcard : 25000000 c0000000 UDISK : e5000000 0 ----------------------------------- base bootcmd=run setargs_nand boot_normal bootcmd set setargs_mmc key 0 recovery key high 5, low 3 cant find fstbt value no misc partition is found misc_message->command = 0 to be run cmd=run setargs_mmc boot_normal mount part name boot-res cant open script.bin, maybe it is not exist WORK_MODE_BOOT board_status_probe [ 3.235]key trigger sunxi_bmp_logo_display [ 3.253]Hit any key to stop autoboot: 1 ... 0 bootcmd:run setargs_mmc boot_normal mmc_pnm:PNM H4G2a. SanDisk EMMC is not detect! --power_sply-- dcdc1_vol read boot or recovery all [ 5.534]sunxi flash read :offset 3000000, 13887154 bytes OK no signature [ 5.546]ready to boot para err in disp_ioctl, cmd = 0xa,screen id = 1 [ 5.555][mmc]: mmc exit start [ 5.559][mmc]: mmc 2 2xmode config clk [ 5.568][mmc]: mmc 2 2xmode config clk [ 5.582][mmc]: mmc 2 cmd 8 timeout, err 100 [ 5.588][mmc]: smc 2 err, cmd 8, RTO [ 5.594][mmc]: mmc 2 mmc cmd 8 err 0x00000100 [ 5.598][mmc]: mmc send if cond failed [ 5.602][mmc]: mmc 2 cmd 55 timeout, err 100 [ 5.608][mmc]: smc 2 err, cmd 55, RTO [ 5.614][mmc]: mmc 2 mmc cmd 55 err 0x00000100 [ 5.618][mmc]: send app cmd failed [ 5.631][mmc]: mmc 2 exit ok [ 5.634] Starting kernel ... <4[ 0.755625] this module is used not! [ 0.908230] Bluetooth: get ap6xxx ap6xxx_bt_wake gpio failed [ 0.908236] [ 0.916238] Bluetooth: get ap6xxx ap6xxx_bt_host_wake gpio failed [ 0.916244] [ 0.961981] otg_wakelock_init: No USB transceiver found [ 0.967861] ths_fetch_sysconfig_para: type err device_used = 1. [ 0.975455] fetch C0_LV_count from sysconfig failed Init display Init keyboard Init camera Init temp sensor Init led Init rtc Init io 2018/02/08-00:02:33 [root@dragonboard ]# Firmware Version:2 ParasResume ImgsMngInit mount success! Sd card is mounted /work/sh/init_usb.sh /dev/mmcblk0p9 ImgsMngSyncPre Create sync file! /mnt/IMGS/20181203-194851.jpg is access /mnt/IMGS/20181203-194846.jpg is access /mnt/IMGS/20181203-194843.jpg is access /mnt/IMGS/20181203-194831.jpg is access /mnt/IMGS/20181203-194822.jpg is access Sync record is not complete.start sync loop! size:75,g_ImgsNull:0,g_ImgsIndex:4 g_ImgsIndex:4,g_ImgsNull:0 mount success! /work/cali/ir_cali_data is access,cali init unmount sucess! Init offset:344 Init point0@278:(-97,-53) Init point1@280:(12,0) Init point2@280:(502,0) Init point3@282:(1005,0) Init point4@284:(1382,118) Init point5@287:(1977,0) Init point6@289:(2456,44) Init point7@290:(2899,101) Got 1 camera devices. Press Control-C to exit... camera thread is running seek thread is running gui_work open /dev/io_func ok! MsgId:31 WM_HBKWIN:1 /mnt/IMGS/20181203-194818.jpg is access MsgId:15 Temp-3:85.0 /mnt/IMGS/20181203-194809.jpg is access Sync completely! intensity:2 lcd brightness:100% Temp-2:26.2 Set ambient inter:-8.7,exter:26.2 Temp-1:26.3